3/4" Simpson MCR07512 Rebar Cutter Finish Nails The length of the bolt

The length of the bolt inside the anchor should not exceed 5"

Equipment supports in corrosive environments

The black phosphate coating is traditional in drywall screws and is designed for use in dry interior environments only

Drives Directly into Concrete: No expansion required

Long Slotted Design: Allows for the most flexibility in installation and adjustment

3/4" Simpson MCR07512 Rebar Cutter Finish Nails The length of the boltWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".